Manual for OpenTX 2.2
  • Introduction
  • The radio
  • Build Options
  • Companion
    • Basic Concepts
    • Setting up OpenTX Companion
    • Flashing Frsky Radios
  • Software overview
    • Navigation
    • Model Selection
    • Main views
    • Telemetry views
    • Radio menus
      • SD Browser
      • Global Functions
      • Trainer
      • Version
      • Diagnostics
      • Hardware
      • Calibration
    • Model menus
      • Model Setup
      • Heli Setup
      • Flight Modes
      • Inputs
      • Mixer
      • Outputs
      • Curves
      • Global Variables
      • Logical Switches
      • Special Functions
      • Custom Scripts
      • Telemetry
  • First steps
  • Advanced features
    • Flight modes
    • Telemetry Values
    • Audio
    • Global variables
    • Flashing the bootloader
    • Add-ons
    • S-PORT flashing
    • Build Option
    • Joystick emulation
    • Managing Throws
  • SD Card contents
  • Model Setup Examples
    • Standard Four Channel
    • Basic Elevon
    • Flaps - One Servo
  • FAQ
  • Contributors
Powered by GitBook
On this page

Was this helpful?

  1. Software overview
  2. Radio menus

Calibration

This is the place where you can calibrate sticks and pots. Follow the on-screen instructions, and note that when asked to center the sticks this includes the throttle stick and the 2 sliders. S1 and S2 pots do not need to be centered, only the extremes are calibrated.

PreviousHardwareNextModel menus

Last updated 4 years ago

Was this helpful?