Manual for OpenTX 2.2
  • Introduction
  • The radio
  • Build Options
  • Companion
    • Basic Concepts
    • Setting up OpenTX Companion
    • Flashing Frsky Radios
  • Software overview
    • Navigation
    • Model Selection
    • Main views
    • Telemetry views
    • Radio menus
      • SD Browser
      • Global Functions
      • Trainer
      • Version
      • Diagnostics
      • Hardware
      • Calibration
    • Model menus
      • Model Setup
      • Heli Setup
      • Flight Modes
      • Inputs
      • Mixer
      • Outputs
      • Curves
      • Global Variables
      • Logical Switches
      • Special Functions
      • Custom Scripts
      • Telemetry
  • First steps
  • Advanced features
    • Flight modes
    • Telemetry Values
    • Audio
    • Global variables
    • Flashing the bootloader
    • Add-ons
    • S-PORT flashing
    • Build Option
    • Joystick emulation
    • Managing Throws
  • SD Card contents
  • Model Setup Examples
    • Standard Four Channel
    • Basic Elevon
    • Flaps - One Servo
  • FAQ
  • Contributors
Powered by GitBook
On this page

Was this helpful?

  1. Software overview
  2. Model menus

Curves

Custom curves can be used either in input formatting or mixers. There are 16 of them available, and they can be of several types (3, 5, 9, 17pt, both with fixed or user-definable x coordinates). 3pt would be a 3-point curve with fixed x, 9pt' is a 9-point curve with user-defined x coordinates.

These curves are available in addition to the "built-in" curves:

  • x>0, x<0: If input is positive resp. negative return input, otherwise 0.

  • |x|: Return the absolute value of the input.

  • f>0, f<0: If input is positive resp. negative, return 100%, otherwise 0.

  • |f|: If input is negative return -100%. If input is positive, return +100%.

The curve editor allows you to define a name for the selected curve, the type, and of course set the coordinates. When the cursor is on one of the editable coordinates, a LONG press of the ENTER key will bring up a menu where you can choose a standard preset curve, mirror the curve vertically, or reset all points.

PreviousOutputsNextGlobal Variables

Last updated 4 years ago

Was this helpful?