> For the complete documentation index, see [llms.txt](https://doc.open-tx.org/opentx-2-3-lua-reference-guide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.open-tx.org/opentx-2-3-lua-reference-guide/part_iii_-_opentx_lua_api_reference/lcd-functions-less-than-greater-than-luadoc-begin-lcd/drawgauge.md).

# lcd.drawGauge(x, y, w, h, fill, maxfill \[, flags])

Draw a simple gauge that is filled based upon fill value

@status current Introduced in 2.0.0, changed in 2.2.0

## Parameters

* `x,y` (positive numbers) top left corner position
* `w` (number) width in pixels
* `h` (number) height in pixels
* `fill` (number) amount of fill to apply
* `maxfill` (number) total value of fill
* `flags` (unsigned number) drawing flags

## Return value

none