# model.getMix(channel, line)

Get configuration for specified Mix

@status current Introduced in 2.0.0, parameters below `multiplex` added in 2.0.13

## Parameters

* `channel` (unsigned number) channel number (use 0 for CH1)
* `line` (unsigned number) mix number (use 0 for first line(mix))

## Return value

* `nil` requested channel or line does not exist
* `table` mix data:
* `name` (string) mix line name
* `source` (number) source index
* `weight` (number) weight (1024 == 100%) value or GVAR1..9 = 4096..4011, -GVAR1..9 = 4095..4087
* `offset` (number) offset value or GVAR1..9 = 4096..4011, -GVAR1..9 = 4095..4087
* `switch` (number) switch index
* `multiplex` (number) multiplex (0 = ADD, 1 = MULTIPLY, 2 = REPLACE)
* `curveType` (number) curve type (function, expo, custom curve)
* `curveValue` (number) curve index
* `flightModes` (number) bit-mask of active flight modes
* `carryTrim` (boolean) carry trim
* `mixWarn` (number) warning (0 = off, 1 = 1 beep, .. 3 = 3 beeps)
* `delayUp` (number) delay up (time in 1/10 s)
* `delayDown` (number) delay down
* `speedUp` (number) speed up
* `speedDown` (number) speed down