OpenTX Taranis Manual
  • Introduction
  • The radio
  • Software overview
    • Navigation
    • Model Selection
    • Main views
    • Telemetry views
    • Radio menus
    • Model menus
      • Model Setup
      • Heli Setup
      • Flight Modes
      • Inputs
      • Mixer
      • Outputs
      • Curves
      • Global Variables
      • Logical Switches
      • Special Functions
      • Custom Scripts
      • Telemetry
  • First steps
  • Advanced features
  • Companion introduction
  • Contributors
Powered by GitBook
On this page

Was this helpful?

  1. Software overview
  2. Model menus

Flight Modes

Next up is the flight modes screen.

8 flight modes plus the default one are available for use. Each of them can be named, has a selectable activation switch (physical or logical), a trim selection array (R, E, T, A when shown mean the mode has its own trim setting for that control, but each can be changed to a number from 0 to 9 and thus use the same value as the specified mode), and slow up/down parameters for smooth transitions between modes. The priority of the flight modes is such as the first FM of 1-8 that has its switch ON is the active one. When none has its switch ON, the default FM0 is active.

PreviousHeli SetupNextInputs

Last updated 4 years ago

Was this helpful?