lcd.drawGauge(x, y, w, h, fill, maxfill [, flags])
Previouslcd.drawFilledRectangle(x, y, w, h [, flags])Nextlcd.drawLine(x1, y1, x2, y2, pattern, flags)
Last updated
Was this helpful?
Last updated
Was this helpful?
Was this helpful?
Draw a simple gauge that is filled based upon fill value
@status current Introduced in 2.0.0, changed in 2.2.0
x,y
(positive numbers) top left corner position
w
(number) width in pixels
h
(number) height in pixels
fill
(number) amount of fill to apply
maxfill
(number) total value of fill
flags
(unsigned number) drawing flags
none
local function run(event)
lcd.clear()
lcd.drawText(1,1,"drawGauge() example", 0)
lcd.drawGauge(1, 11, 120, 25, 250, 1000)
end
return{run=run}